IN STORE
Benefit from our store located on Verona Island, ME. For your convenience, we keep our chemicals, parts, and accessories stocked at all times. We also offer water testing services and expert advice to ensure a stress free experience with your pool or spa.
FREE WATER ANALYSIS
We offer FREE water tests to ensure safe swimming for all of our customers. Our experts will test your water, identify any issues, and provide recommendations to keep your pool or spa crystal clear! Get accurate readings on:
-
Free Chlorine
-
Total Chlorine
-
pH
-
Alkalinity
-
Calcium Hardness
-
Stabilizer
-
Borates
-
Copper
-
Iron
-
Phosphates
Spa Chemicals
LEARN MORE
Granular Dichlor dissolves rapidly to shock and sanitize your water. It also oxidizes organic material and undesirable compounds to help keep your water clean and clear.
Application: Apply to the spa while the water is circulating. To super shock, add 1 ounce per 500 gallons of water. To maintain your spa, add as needed to keep a 1 to 3 ppm of chlorine reading.
​
Brominating Tabs are an alternative option for sanitizing your spa. Bromine comes in tablet form and slowly dissolves, offering a constant feed of sanitizer to your spa.
Applications: Introduce Bromine Tabs using a dispensing device and adjust to introduce a 2-4 ppm of bromine. Amount of tablets used will vary based on the spa make/model, frequency of use, level of bromine maintained, etc.​
LEARN MORE
Oxy Blast is a non-chlorine buffered oxidizer. This works to revitalize your sanitizer, clear the water, eliminate odors and more.
Application: Apply to the spa while the water is circulating. Apply three table 250 gallons directly to the water. This product is typically used once a week depending on spa usage.
​
LEARN MORE
Spa Salts are specifically designed to work with spa saltwater purification systems. Enjoy the benefits of smoother, naturally softer-feeling water!
Application: Apply the appropriate amount of salt to maintain the proper levels specified by your salt system.
LEARN MORE
Brom Bank quickly establishes bromine reserves in spas. This product is NOT a sanitizer or a disinfectant; it is used only in conjunction with Bromine Tabs
Application: Apply to the spa while the water is circulating or as it is being filled. Add 4 ounces for every 250 gallons of water on newly-filled spas. Introduce Bromine Tabs into the spa using a dispensing device and adjust to maintain 2-4 ppm of bromine.
​
LEARN MORE
Calcium Hardness raises the calcium in your spa. If your levels are too low, a small addition of Hardness Increaser brings the levels up safely while not clouding the water. When levels are ideal, you will prolong the life of your spa.
Application: Apply to the spa while the water is circulating or as it is being filled.
1 ounce per 500 gallons of water will raise calcium hardness level by approximately 10 ppm​.
LEARN MORE
Alkalinity helps keep your pH in the ideal range. Even if pH is in range, low or high alkalinity can create issues in your spa. Alkalinity doesn’t change that often, so it only needs to be tested half as frequently as pH.
Application: Apply to the spa while the water is circulating or as it is being filled
Use 1 ounce per 100 gallons of water to increase total alkalinity by 20 ppm
LEARN MORE
pH Up raises the pH of your spa. Low pH makes the water corrosive, which is uncomfortable and will slowly damage the sensitive equipment in your spa. It is vital your pH stays between 7.2-7.6 ppm.
Application: Apply to the spa while the water is circulating. If pH is below 7.2, but above 6.8, add 1 dry tablespoon per 500 gallons of water. Wait 30 minutes and test. If pH remains low, then repeat treatment​.
LEARN MORE
pH Down lowers the pH of your spa. It is vital your pH stays between 7.2-7.6 ppm.
Application: Apply to the spa while the water is circulating. If pH is above 7.8, add 1 dry tablespoon per 500 gallons of water. Wait 15 minutes and test. If pH remains high repeat treatment​.
LEARN MORE
Cartridge Cleaner helps clean the substances that a spa filter grabs, such as body oil, dead skin, dirt, and grease. Regular cleaning of your filter will keep your water beautiful.
Application: Mix 16 ounces to 2.5 gallons of water and submerge the filter. Soak the filter for 30 minutes or longer, then remove and rinse thoroughly. Use Filter Cleaner every 4 to 8 weeks
​
LEARN MORE
LEARN MORE
Jet Line Cleaner helps remove the invisible layer of gunk (biofilm) from the plumbing of your spa. This material can eventually lead to cloudy water or other undesirable water conditions.
Application: For use only when spa water is at or above 90 degrees. With the jet pump running add 1 bottle directly to the water. Let it circulate for at least 8 hours. Drain, clean the surfaces, and refill.
​
LEARN MORE
Stain & Scale Preventer softens hard water and prevents staining and discoloration due to metals in the water. Regular use prevents scale from forming on surfaces and sensitive equipment.
Application: For removal of fresh stains and scale, balance pH & alkalinity, then add 2 to 3 per 100 gallons of water. To prevent staining and scale formation, add 1 ounce per 100 gallons of water weekly.
Clear Blue acts as a filter aid to help filter out smaller particles, leaving your spa crystal clear.
Application: For cloudy water add 4 ounces per 500 gallons of water. To maintain clear water, for every 500 gallons add 2oz of this product directly to spa water.
LEARN MORE
Foam Out helps remove the foam in your spa.
Application: While your spa is circulating, simply add one capful of Foam Out directly to the water in your spa. Wait 30 minutes, and repeat if needed.
​
LEARN MORE
Naturally Clear emulsifies and biodegrades contaminates commonly found in spas. Use weekly as part of your routine maintenance.
Application: To maintain clear water, add 1 ounce per 100 gallons of water.
LEARN MORE
LEARN MORE
Spa Recovery is a fast acting formula that removes phosphates from your spa.
Application: Determine the phosphate level of your spa and apply the appropriate dosage. Run your spas filtration system for 2-6 hours.
​
Cover Rejuvenator helps prevent fading and discoloration of your spa cover. It also provides water protection by leaving a protective silicone shield.
Application: Shake product gently and then apply liberally to the spa cover surface. Let the product sit for 10-15 minutes, then wipe off the excess. Apply twice for initial treatment.
​
LEARN MORE
Borates help keep your spa water perfectly balanced. This means reduced eye irritation, no itchy feeling when you exit the water, and the water feels smoother against your skin.
Application: Ensure your spa had proper pH and Alkalinity readings before applying borates. Add .5-1lb of this product directly to water for every 250 gallons.
LEARN MORE
Spa Cleaner can be used on the spas surface to remove grease and grime from the water line.
Application: Apply this product with a nonabrasive cleaning pad or sponge. For problem areas allow product to sit for 5 minutes.
LEARN MORE
@EASE is a sanitizing system that combines minerals and chlorine to kill bacteria. With this system you only need to shock once a month!
Application: Allow the system to float in your spa to deliver continuous sanitizing. Replace the chlorine cartridge every 3-4 weeks and the mineral cartridge every 4 months.
​
LEARN MORE
Filter Mate uses a blend of minerals to help kill the bacteria in your spa. This is compatible with both chlorine and bromine.
Application: This mineral stick is typically placed inside of the filter housing and should be replaced every 4 months.
​
LEARN MORE